Choosing the right water heater for your home. Water heaters are one of the essential appliances in your home. They provide hot water for showers, washing dishes and clothes, and can even heat your home. However, with so many options, types, and sizes of water heaters, it can be challenging to know which one is right for you.
There’s more to owning a water heater than just heating water. Whether you’re thinking about buying a new one or already have one in your home, it’s essential to know the ins and outs of these appliances.
What you need to know about water heaters:
–How they work: Water heaters use electricity or gas to heat and store it in a tank. The tank size will determine how much hot water you have on hand at any given time.
–What they cost: Water heaters can range from around $300 to $1,500. The price will depend on the unit’s type and size, the fuel it uses, and any special features it has.
–How to choose the right one: When choosing a water heater, you’ll need to decide on the size, fuel type, and any special features you want. You’ll also need to consider your climate and how much hot water you typically use.
–How to maintain them: Water heaters should be flushed out every six months to remove sediment build-up. This will help extend the unit’s life and ensure it works properly. You’ll also need to occasionally check the anode rod and replace it, if necessary.
-If your water heater’s pilot light has gone out, you’ll need to relight it. Here are a few steps to take to get your pilot light burning again:
First, locate the pilot light assembly on your water heater. This is usually located near the bottom of the unit. Once you’ve found it, turn off the gas supply to the team. Then, use a flashlight to inspect the area around the pilot light for debris or blockages.
Next, use a small wire brush to clean off the tip of the pilot light assembly. Once that’s done, turn on the gas and use a long lighter to ignite the pilot light. Hold the flame close to the opening for at least 30 seconds before releasing it.
If the pilot light doesn’t stay lit, you may need to adjust the flame. To do this, turn the knob that controls the gas flow to the “low” setting and relight the pilot light. Once it’s lit, slowly turn the knob back to the “high” setting.
Here is a guide to the different types of water heaters and what you need to know before you buy one.
The storage water heater is the most common type of water heater. This type of water heater will store hot water in a tank and then uses a heating element to keep the water hot. Storage water heaters come in various sizes, so they can be used in homes of all sizes.
Another type of water heater is the tankless water heater. This type of water heater does not store hot water in a tank. Instead, it heats water on demand, so you only use energy when you need hot water. Tankless water heaters are becoming increasingly popular because they are more efficient than storage water heaters.
3. Solar Water Heaters
Solar water heaters are sustainable by using the sun’s energy to heat water. They are a more environmentally friendly option than other types of water heaters and can save you money on your energy bills. However, solar water heaters require a sunny location and can be expensive to install.
4. Heat Pump Water Heaters
Heat pump water heaters will use electricity to move heat from one place to another. This type of water heater is more efficient than other water heaters and can save you money on energy bills. However, heat pump water heaters require a well-insulated space and can be expensive to install.
Understanding water heaters allow you to choose the right one for your home and budget. And by taking good care of it, you can enjoy many years of hot water.
For more information, contact Raleigh’s most trusted plumber at www.poolesplumbing.com.